Before delving into an overwhelming amount of fiberglass pool prices, one should first understand what it takes to install and operate a pool like this. Why do so many people choose a fiberglass pool over others? The answer is in the ease of installation and maintenance. Pools made of fiberglass are made into a single piece, greatly simplifying installation. Many of the pipe and lighting work is already built into these pools, streamlining the whole process and reducing the chance for errors. The beauty of these pools is that users can select from a wide variety of colors, textures and patterns for the pool’s interior. The science of making pools from fiberglass has been around for quite some time- over 50 years. The shells are built in a factory out of fiberglass and resin.
In the factory, these pools are built in many shapes and sizes. After the resin has cured, the pools are coated with a gel that protects the pool floor. This durable gel coating keeps the pool smooth and clean for decades if cared for properly. These pools come patterned with tile or textured material. Extras like fiber optic lighting or in-ground filtration systems can greatly affect the range of fiberglass swimming pool prices. The price of these pools can range from around $10,000 to $30,000 and up depending on the size and chosen options. Owners of these pools have the advantage of not needing to do certain maintenance procedures like acid washing or liner replacement. However, weekly cleaning and chemical checking are essential in keeping the gel coating pristine. The gel coat can be extremely difficult or impossible to repair once neglected. It is important to never drain the pool, as pressure outside the pool can build up and cause it to crack or change shape. Keep the water level at the mid-line of your side skimmers for best results.
The fiberglass pools prices you see online and in catalogs are most often just for the pool itself. Installing a pool can often cost just as much as the physical pool. For this reason, it is important to know what to expect when having a pool installed:
The first step in installation is to choose a site for the pool. With the help of a professional, this can be done with relative ease. Consider things like the angle of the sun during the day, accessibility to a restroom, and shaded areas to sit and relax between swims. Full sun exposure is recommended if you do not have a built in heater. Gathering areas are best placed at the shallow side of the pool. Once the location is tagged, the digging will begin. The hole should be dug to the specification stated in the pool’s guide. Depending on the shape and size of the pool, the digging process will take a few hours or more. Flat-bottomed pools are the easiest ones to dig holes for, while deep pools are more difficult. With frequent measurements and the use of a laser level your hole will be complete in no time. After completion, the hole will be filled with sand or gravel on the bottom at a precise inclination.
Next, the pool will be delivered to your house and lifted into the air with a crane. After a tedious process of leveling and checking which takes about 3 hours, the pool will be leveled to within an inch of where it needs to be. Since the hole is wider than the actual pool, you can now work on the plumbing. Install any lighting, piping and automatic cleaning systems that you wish, using a drill to cut the proper holes in the pool. The pipes assemble together easily with pipe glue. Power is then connected to the filter. Now you can start filling up the pool to a certain pre-defined level. A garden hose is just too slow for this process, so you’ll need to use a water hydrant or water truck. The water should be 12 inches higher than the back fill surrounding it.
The next step, called rough grade, ensures that your pool is at a high point in your yard. A high point is the location where all ground surrounding the pool flows away from it, not into it. This prevents water from rain and sprinklers from flowing into the pool, bringing dirt and grime with it. Two to six inches of elevation above the surrounding ground is usually enough. Deck can be poured in either a cantilever or standard method. Standard method involves pouring concrete around the pool up to the edge, leaving some fiberglass exposed. Cantilever pouring creates a lip over the edge of the pool, hiding the fiberglass edges. Pouring should be done about a week after the pool is in-ground to allow it to settle.
Now that you’re informed, you can start seeking out some fiberglass pool prices! After initial installation, you will want to purchase accessories like a pool cover pump or water tester.